Motor vehicles must be equipped with rear reflectors. The motor vehicle with a length of more than 6 m shall be equipped with side reflectors, and the vehicle train and the trailer of the wheeled tractor unit must be equipped with side reflectors. The reflector shall be firmly connected with the moto vehicle, and shall ensure that the reflected light can be confirmed at the irradiation position when it is illuminated by the vehicle headlamp 150 m in front of it at night.

1. The moto vehicles with no-load height greater than 3.0m or width greater than 2.10m shall be equipped with clearance lamps.

2. The truck and trailer with a maximum design total mass of more than 3500kg shall be equipped with reflective body markings at the rear. The rear reflective body markings shall reflect the rear width of the motor vehicle. The vehicle body reflective signs shall be set on the side of the vehicle train and the truck with a length of 10 m or more, and the length of the reflective signs shall not be less than 50% of the vehicle length.

The cargo box or other cargo carrying device of a motor vehicle must be so constructed that it can safely and securely load goods.

1、 A safety frame at least 70mm higher than the cab shall be installed at the front of the cargo box of trucks (except dump trucks, trucks with a load capacity of less than 1000 kg, and tricycles).

2、The front of the cargo box of a three wheel truck without a cab shall be equipped with a safety frame with strength meeting the requirements, and its height  cargo shall be at least 800mm higher than the driver's seat cushion plane.

3、 For the van in which the driver and  cargo goods are in the same compartment, the isolation device with strength meeting the requirements shall be installed behind the last row of seats.